Targeted Exchange Line Access; Initiating Targeted Exchange Line Access - Auerswald COMpact 3000 analog Operating Manual

Functions

Targeted Exchange Line Access

Initiating Targeted Exchange Line Access

Targeted Exchange Line Access
Using targeted exchange line access, you can define which of your own external phone number
is transmitted for an external call.
Initiating Targeted Exchange Line Access
Initiation can be carried out as follows:
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
1. Pick up the receiver.
2. Dial ##96.
3. Enter the separate external telephone number to be transmitted. The following entries
are possible:
External phone numbers
exchange access)
4. Dial *.
5. Enter an external telephone number. The following entries are possible:
External phone number
the exchange line access number before dialling the telephone number.)
** and short code number
omit the **.)
The subscriber is called.
234
(independent of the configuration of the direct
(If you do not use a direct exchange line access, dial
(If you do not use a direct exchange line access,
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020