Initiating Targeted Exchange Line Access
Using targeted exchange line access, you can define which external
exchange line and own external number is transmitted for an external call.
Proceed as follows:
•
Using a character string on the internal phone
•
Using the menu/function key on a system phone (optional, see the
phone manual)
Requirements:
•
External S
0
the Instructions)
1. Pick up the receiver.
2. Dial ##96.
3. Enter the separate external number to be transmitted. Possible entries:
External numbers
4. Dial *.
5. Enter an external number. Possible entries:
External number
preceding exchange line access number)
Short code number
line phone: with preceding **)
The subscriber is called.
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
port, external analogue port (optional, see Technical Data in
(for exchange line request type Internal phone: with
(for exchange line request type Direct exchange
Phoning
Outgoing Calls
247