Configuring A Currency Name; Configuring The Cost Per Call Unit - Auerswald COMpact 3000 analog Operating Manual

Further steps:
– Save your settings before you leave the page.

Configuring a Currency Name

The currency name indicates which abbreviation is used for the currency in the configuration
manager (e.g., "EUR" for Euros).
Note: The currency name is used, e.g., on the page USER DATA > Call data
list.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open one of the following pages:
• COMpact 3000 analogue/VoIP: FUNCTIONS > Time account > Settings
• COMpact 3000 ISDN: FUNCTIONS > Time and call allowance accounts >
Settings
2. Enter the desired abbreviation in the Currency name entry field. The following entries
are possible:
Up to 3 digits
Digits and characters
Further steps:
– Save your settings before you leave the page.

Configuring the Cost per Call Unit

The cost per call unit are used for internal calculations and the display.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Telephone Book and Lists
Call Data
Configuring a Currency Name
147