Restart Rip Graceful - Allied Telesis IE340 Series Command Reference Manual

RIP C
OMMANDS

RESTART RIP GRACEFUL

restart rip graceful
Overview Use this command to force the RIP process to restart, and optionally set the
grace-period.
restart rip graceful [grace-period <1-65535>]
Syntax
Mode Privileged Exec
Default The default RIP grace-period is 60 seconds.
Usage notes After this command is executed, the RIP process immediately shuts down. It
notifies the system that RIP has performed a graceful shutdown. Routes that have
been installed into the route table by RIP are preserved until the specified
grace-period expires.
When a restart rip graceful command is issued, the RIP configuration is reloaded
from the last saved configuration. Ensure you first enter the command
running-config
Example To apply a restart rip graceful setting, grace-period to 100 seconds use the
following commands:
awplus#
awplus#
C613-50631-01 Rev A
startup-config.
copy running-config startup-config
restart rip graceful grace-period 100
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
copy
1058