Monitoring The Policy Configuration Of Atm Subinterfaces; Table 31: Show Atm Subinterface Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual
Software for e series broadband services routers policy management configuration guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04:
- Reference manual (284 pages) ,
- Configuration manual (632 pages)
Table of Contents
Advertisement
Related
Documentation
Monitoring the Policy Configuration of ATM Subinterfaces
Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
IP Policy input routeForXYZCorp
classifier-group *
filter
5 Packets
540 Bytes dropped
atm policy
frame-relay policy
gre-tunnel policy
ip policy
ipv6 policy
l2tp policy
mpls policy
vlan policy
Display information about a subinterface's ATM policy lists.
To display information about ATM policy lists:
host1#show atm subinterface
ATM policy input PolCbr
classifier-group *
3096packets, 377678 bytes
traffic-class best-effort
color green
Table 31 on page 175 lists the show atm subinterface command output fields.
Table 31: show atm subinterface Output Fields
Field Name
ATM policy
mark-clp
color
classifier-group
filter
forward
traffic-class
Chapter 9: Monitoring Policy Management
Field Description
Type and name of the ATM policy
CLP bit value, 0 or 1
Color applied to packet flow for queuing: green,
yellow, or red
Name of the classifier control list used by the
policy
Filter policy action
Forward policy action
Traffic class in the policy list
175
Advertisement
Table of Contents
