Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show qos-profile
Syntax
Release Information
Description
Options
Mode
Related
Documentation
1060
To display information about all QoS profiles or a specific QoS profile:
show qos-profile [ qosProfileName ] [ brief ] [ filter ]
To display information about the QoS profiles attached to a specific interface:
show qos-profile references interface interfaceType interfaceSpecifier
[ atmVpi | s-vlanIdValue ] [ explicit ] [ brief ] [ filter ]
To display information about the QoS profiles attached to a specific L2TP session:
show qos-profile references lt2p session sessionName [ explicit ] [ brief ] [ filter ]
To display information about the QoS profiles attached to a specific tunnel-service interface:
show qos-profile references tunnel-server interfaceType [ explicit ] [ brief ] [ filter ]
Command introduced before JunosE Release 7.1.0.
references keyword added in JunosE Release 7.1.0.
Displays information about QoS profiles configured on the router. Use the references
keyword to display information about QoS profiles attached to an interface, L2TP session,
or tunnel-service interface.
qosProfileName—Name of the QoS profile
references—Displays interface profiles that reference this profile
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
atmVpi—Virtual path identifier of this PVC; number in the range 0–255
s-vlanIdValue—S-VLAN ID number in the range 0–4095
sessionName —Name of the L2TP session
explicit—Displays attachments for QoS profiles only on the specified interface and not
QoS profiles stacked above the interface
brief—Displays information in a condensed format
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Monitoring the Configuration of QoS Profiles
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
