Table 96: Show L2Tp Dial-Out Target Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

To display detailed information about a particular target, specify the target IP address
and mask:
host1:dialout#show l2tp dial-out target 10.1.1.0/24
Target 10.1.1.0/24
Operational status: up
Active sessions: 10
Total triggers: 127
Failed sessions: 2
Connected sessions: 8
To display aggregate counts for targets in each of the possible operational and
administrative states:
host1:dialout#show l2tp dial-out target summary
To display detailed configuration, state, and statistics:
host1:dialout#show l2tp dial-out target detail
To display information about the operational or administrative state:
host1:dialout#show l2tp dial-out target state inService
To displays dial-out information across all virtual routers:
host1:dialout#show l2tp dial-out target allVirtualRouters
NOTE: The level of a user's permission determines the use of the allVirtualRouters
option. For example, if you have permission to view only the current virtual router,
then that is all that is displayed when you enter a command.
Table 96 on page 455 lists the show l2tp dial-out target command output fields.
Meaning

Table 96: show l2tp dial-out target Output Fields

Field Name
Target
Status
Active Sessions
Total triggers
Failed sessions
Connected sessions
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Address of the target
Status of the connection to the target
Currently active session to the target
Trigger packets received for the target
Sessions that are currently in the failed state
Sessions that are currently in the connected state
Monitoring Dial-out Targets within the Current VR Context
455