Monitoring Operational Status Within The Current Vr Context; Table 96: Show L2Tp Dial-Out Target Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Related
Documentation

Monitoring Operational Status within the Current VR Context

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.

Table 96: show l2tp dial-out target Output Fields

Field Name
Target
Status
Active Sessions
Total triggers
Failed sessions
Connected sessions
For detailed information about operational states, see Dial-Out Operational States on
page 411
show l2tp dial-out target
Display dial-out state machine operational status and statistics within the current VR
context.
This command displays aspects of the dial-out state machine and details about the
dial-out routes themselves. This section presents sample output. The actual output on
your router may differ significantly.
To display dial-out state machine operational status and statistics within the current VR
context:
host1#show l2tp dial-out virtual-router
Dial-out Virtual Router Configuration and Operational Status
Virtual router host1:
Virtual router operational status: inService
Maximum trigger buffers per session: 0
To display aggregate counts for dial-out state machines in each of the possible operational
and administrative states:
host1:dialout#show l2tp dial-out virtual-router summary
To display detailed configuration, state, and statistics:
host1:dialout#show l2tp dial-out virtual-router detail
To display information about the operational or administrative state:
host1:dialout#show l2tp dial-out virtual-router state down
To displays dial-out information across all virtual routers:
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Address of the target
Status of the connection to the target
Currently active session to the target
Trigger packets received for the target
Sessions that are currently in the failed state
Sessions that are currently in the connected state
453