L2Tp Dial-Out Dormant-Timer-Value - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

l2tp dial-out dormant-timer-value

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] l2tp dial-out dormant-timer-value dormantTime
Command introduced before JunosE Release 7.1.0.
Defines how long the dial-out session stays in the dormant state waiting for a new trigger
after the associated L2TP outgoing call is ended. The no version set the dormant timer
to the default value, 300 seconds (5 minutes).
dormantTime—Range 0–3600 seconds
Global Configuration
Chapter 12: L Commands
1159