Reference Line; Overview; Defining The Reference Line - Leica TS01 User Manual

7.9
7.9.1
Description
Access
Next step
7.9.2
Access
Description
Define the base line
Apps
Field Option
dN: Display only
dZ: Display only

Reference Line

Overview

The Reference Line app can be used to stake out or measure points relative to
a line defined by two points.
Reference Line is an application that facilitates the easy stake out or checking
of lines, for example, for buildings, sections of road, or simple excavations.
It allows to define a reference line and then complete the following tasks
regarding that line:
Line & offset
•
Set out points
•
1. Select Apps from the Main Menu.
2. Select Reference Line.
3. Complete app pre-settings. Refer to
Define the base line for the reference line.

Defining the Reference Line

Select Define Reference Line from the Reference Line menu.
A reference line can be defined by referencing a known base line. The refer-
ence line can be offset either longitudinally, in parallel or vertically to the base
line, or be rotated around the first base point as required. Furthermore the
reference height can be selected as the first point, second point or interpol-
ated along the reference line.
The base line is fixed by two base points. All points can be either measured,
manually entered, or selected from the memory.
P1
P0
TSOX_088
Description
Computed residual for the Northing coordin-
ate.
Computed residual for the Height coordin-
ate.
P2
Base line
d1
d2
P0 Instrument station
P1 Start point
P2 End point
d1 Known distance
d2 Difference in height
a
6 Apps - Getting Started.
Azimuth
61