Installation and Commissioning
Commissioning
Putting ISDN System Telephones into Operation
The end device is ready for operation.
Putting ISDN System Telephones into Operation
Requirements:
– The internal telephone number is configured on the S
1. Connect end devices with a separate power supply to the 230 V mains.
2. Select the language.
3. Enter the internal telephone number as an MSN for the end device.
The end device is ready for operation.
Putting VoIP End Devices into Operation
Requirements:
– The internal telephone number is configured for VoIP.
– The user password is configured for the internal telephone number.
1. Connect end devices with a separate power supply to the 230 V mains.
2. When configuring the end device, create a provider named "PBX" and then enter the
PBX IP address as the registrar and domain.
3. When configuring the end device, create an account for the provider "PBX" and enter
the internal phone number for the user name and the associated user password as
the password.
The end device logs on to the PBX.
Putting VoIP System Telephones into Operation
Requirements:
– The internal telephone number is configured for VoIP.
78
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
port in question.
0