Configuring The Password For The Network Connection On The Tapi Server; Installing Tapi Driver (Tsp) - Auerswald COMpact 3000 analog Operating Manual

Functions
LAN-TAPI

Configuring the Password for the Network Connection on the TAPI Server

Configuring the Password for the Network Connection on the TAPI Server
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > LAN TAPI > LAN TAPI configuration.
2. Enter the password in the Password for the network connection of the TAPI
server entry field. The following entries are possible:
6 to 8 characters
Digits and characters
Further steps:
– Save your settings before you leave the page.

Installing TAPI driver (TSP)

The PBX must be connected with a server PC via a TCP/IP network. The TAPI driver (TSP)
that belongs to the PBX must be installed on this server PC.
Important: If you would like to integrate the LAN-TAPI into an existing
network, please contact the system administrator responsible for this. Making
changes to an existing network may cause considerable functional distur-
bances.
Note: You can find the current version of the driver on the Internet (see
www.auerswald.de/service).
Requirements:
– A driver file (*.exe) in its current version saved on a data storage medium (PC)
– Server PC that fulfils one of the following minimum requirements:
252
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020