Table of Contents
Advertisement
Functions
Configuration Switchover
Copying Switching Times
On an enabled holiday, the switching times for the corresponding weekday
are taken into account if no holiday switching times have been entered
(holiday).
Proceed as follows:
• Using the configuration manager
Requirements:
• At least two configured configurations
• For using the holidays: Configured and enabled holidays
1. Open the page Time control > Switching times.
2. Select the desired day.
3. Click
New.
4. In the list field under Time select the desired time.
5. In the list field under Configuration select the desired configuration.
Further steps:
• Enable the automatic configuration switchover.
Copying Switching Times
Created switching times can be copied from one weekday to another.
Proceed as follows:
• Using the configuration manager
1. Open the page Time control > Switching times.
2. Click
Copy.
The window Copy switching times opens.
3. In the list field under Source select the weekday, whose switching times should be
copied.
400
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Advertisement
Table of Contents
