Copying Switching Times - Auerswald COMpact 3000 analog Operating Manual

(Example: When you enter 34 minutes, this value is rounded down to 30
minutes.)
4. Select the desired configuration in the Configuration list field.
Further steps:
– Save your settings before you leave the page.
– Enable the automatic configuration switchover.

Copying Switching Times

Created switching times can be copied from one weekday to another. Doing this, existing
switching times of the target weekday (to) are replaced by the switching times of the source
weekday (Copy switching times from).
Copying can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
– Created switching times
1. Open the page FUNCTIONS > Configurations > Create switching times.
2. Click Copy switching times.
3. In the Copy switching times from list field, select the weekday, whose switching
times should be copied.
4. In the to list field, select the weekday to which the switching times should be copied.
5. Click Copy switching times.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Functions
Configuration Switchover
Copying Switching Times
247