JunosE 11.2.x BGP and MPLS Configuration Guide
Related Topics
Monitoring ATM VCs and VPI/VCI Ranges Used for MPLS
Purpose
Action
Meaning
326
For more information about using the traceroute command, see Reachability Commands
in the JunosE IP, IPv6, and IGP Configuration Guide,
traceroute
Display information about ATM VCs used as MPLS LSPs and VPI-VCI ranges reserved
for MPLS when you use the interface label space for MPLS labels.
To display all VCs and reserved VC ranges on the router:
host1#show atm vc
Interface
VPI VCI
VCD
------------ --- ---- ---- ---- ----- ---- ----- ----- ----- ---
ATM 3/0.2
0 101
4375 PVC
ATM 3/0.3
0 102
4376 PVC
...
ATM 3/0.8099
1 8099 8099 PVC
ATM 3/0.8100
1 8100 8100 PVC
8000 circuit(s) found
Reserved VCC ranges:
Start Start End End
Interface
VPI
VCI
VPI VCI
--------- ----- ----- --- ---
ATM 2/0
2
100
ATM 2/0
3
300
2 reservation(s) found
To display a summary of all reserved VC ranges on the router, including those reserved
for MPLS use:
host1#show atm vc reserved
Reserved VCC ranges:
Start Start End End
Interface
VPI
VCI
VPI VCI
--------- ----- ----- --- ---
ATM 2/0
2
100
ATM 2/0
3
300
2 reservation(s) found
Table 60 on page 326 lists the show atm vc command output fields.
Table 60: show atm vc Output Fields
Field Name
Interface
VPI
VCI
VCD
Type
Cate Rx/Tx Rx/Tx Rx/Tx Sta
Type Encap gory Peak
AUTO
CBR
1000
AUTO
CBR
1000
SNAP
UBR
0
SNAP
UBR
0
2 102
3 303
2 102
3 303
Field Description
Interface type and number
Virtual path identifier
Virtual channel identifier
Virtual circuit descriptor
Type of circuit: PVC
Avg
Burst tus
0
0 UP
0
0 DOWN
0
0 UP
0
0 DOWN
Copyright © 2010, Juniper Networks, Inc.