L2Tp Dial-Out Session Reset - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2tp dial-out session reset

Syntax
Release Information
Description
Options
Mode
1162
l2tp dial-out session reset triggerIpAddress
Command introduced before JunosE Release 7.1.0.
Resets the state of a dial-out session by forcing it to the dormant state. There is no no
version.
triggerIpAddress—Trigger IP address of the session
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.