L2Tp Destination Profile - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

l2tp destination profile

Syntax
Release Information
Description
Options
Mode
1154
l2tp destination profile { profileName [ [ virtual-router vrName ]
ip address ipAddress ] | [ virtual-router vrName ] ip address ipAddress }
no l2tp destination profile { profileName |
[ virtual-router vrName ] ip address ipAddress }
Command introduced before JunosE Release 7.1.0.
Creates or accesses a destination profile that defines the location of a LAC. The no version
removes the L2TP destination profile.
profileName—Name of the L2TP destination profile
vrName—Name of the virtual router to be used to reach the destination (that is, the
LAC). If you do not specify a virtual router, the current virtual router context is used.
ipAddress—IP address to be used to reach the destination
Global Configuration
Copyright © 2010, Juniper Networks, Inc.