L2Tp Destination Lockout-Test - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2tp destination lockout-test

Syntax
Release Information
Description
Mode
1154
[ no ] l2tp destination lockout-test
Command introduced in JunosE Release 7.2.0.
Configures L2TP to test locked-out destinations to verify whether a destination is available
before it is returned to service. The no version restores the default behavior, in which
locked-out destinations are not tested.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.