Ethernet Link Aggregation Configuration Commands; Description; Display Interface Bridge-Aggregation - H3C S7500E Series Command Reference Manual

9
Ethernet Link Aggregation Configuration
Commands

Ethernet Link Aggregation Configuration Commands

description

Syntax
description text
undo description
View
Layer 2 aggregate interface view
Default Level
2: System level
Parameters
text: Description of the interface, a string of 1 to 80 characters.
Description
Use the description command to configure a description for an interface. You can include information
such as the purpose of the interface for the ease of management.
Use the undo description command to restore the default.
By default, the description of an interface is interface-name Interface. For example, the default
description of Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab

display interface bridge-aggregation

Syntax
display interface bridge-aggregation [ brief [ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation interface-number [ brief ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
9-1