Password-Digit - H3C MSR 20-20 Command Reference Manual

2737
An access number can contain up to 31 characters, but no unacceptable
characters such as a letter. At most 100 access numbers can be configured for the
voice gateway.
The shortest match and exact match are preferred for access number match. If an
access number template is the same as some voice entity template, the global
number substitution rules in voice dial program view and those in voice subscriber
line view will be valid for the access number, but no entity substitution rule can be
matched in access number view.
Example # Add the access number 17909 and enter access number view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 17909
[Sysname-voice-dial-anum17909]
# Add the access number 179 and enter access number view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] gw-access-number 179..
[Sysname-voice-dial-anum179..]
# Delete the access number 17909.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] undo gw-access-number 17909
# Delete all access numbers.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] undo gw-access-number all
Delete all access numbers, are you sure? (Y/N) y

password-digit

Syntax
password-digit password-digit
undo password-digit
View Access number view
Parameter password-digit: Number of digits in a password, in the range of 1 to 16.
Description Use the command to configure the number of digits in a
password-digit
password for some access number in the card number/password process.