Reset Voice Radius Statistic; Selectlanguage - H3C MSR 20-20 Command Reference Manual

reset voice radius statistic

Syntax
View
Parameter
Description
Related command:
Example

selectlanguage

Syntax
View
Parameter
Description
Related command:
Example
reset voice radius statistic
User view
None
Use the reset voice radius statistic
exchanged between the voice RADIUS module, CMC module, and AAA module.
display voice radius statistic.
# Clear the statistics of messages exchanged between the voice RADIUS module,
CMC module, and AAA module.
<Sysname> reset voice radius statistic
selectlanguage { enable | chinese | english }
undo selectlanguage
Access number view
enable: Enables the language selection function so that users can select a
language to play prompt tones.
chinese: Plays prompt tones in Chinese.
english: Plays prompt tones in English.
Use the selectlanguage
tones are played in the caller number process with IVR.
Use the
undo selectlanguage
By default, prompt tones are played in Chinese.
This command is available only in the caller number process with IVR.
gw-access-number and process-config.
# Configure the voice gateway to play prompt tones in English.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
command to clear statistics of messages
command to configure a language in which prompt
command to restore the default.
2741