Gw-Access-Number - H3C MSR 20-20 Command Reference Manual

2736 C 180: V
HAPTER OICE

gw-access-number

Syntax
View
Parameter
Description
RADIUS C C
ONFIGURATION OMMANDS
Table 703 Description on fields of the display voice radius statistic command
Field
AcctRsp_PstnCaller
AcctRsp_VoipCaller
AcctRsp_PstnCalled
AcctRsp_VoipCalled
Account_Ok
Account_Failure
Cut
CMC=>VORDS
Setup
Alerting
Connect
Release
DtmfInformation
ChannelReady
FaxVoiceSwitch
FaxTone
gw-access-number access-number
undo gw-access-number { access-number | all }
Voice dial program view
access-number: Access number (for example, 169 and 17909), a string of up to 31
characters consisting of digits 0 through 9 and the wildcard ".". The wildcard "."
represents a digital character and must follow a digit or appear separately.
all: Deletes all access numbers.
Use the
gw-access-number
access number view.
Use the
undo gw-access-number
numbers.
By default, no access number is configured.
When you delete all configured access numbers, the voice gateway will give alarm
information, requiring you to make a confirmation. You can press <Y> to delete all
access numbers or press <N> to cancel the operation.
Description
Accounting_Response message for PSTN caller
Accounting_Response message for VoIP caller
Accounting_Response message for PSTN callee
Accounting_Response message for VoIP callee
Accounting_Ok message
Accounting_Failure message
Cut message
Messages from the CMC module to the voice RADIUS module
Setup message
Alerting message
Connect message
Release message
DTMF digit
Channel_Ready message
Fax_Voice_Switch message
Fax_Tone message
command to configure an access number or enter
command to delete one or all access