Debugging Physical; Reset Hardware Internal Dump Slot Inner-Port Counter - H3C MSR Series Probe Command Reference

keyregs: Displays addresses and values of the key registers.
priv-info: Displays private information.

debugging physical

Use debugging physical to enable IPC-related debugging.
Use undo debugging physical to disable IPC-related debugging.
Syntax
debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all | error |
event | input | output }
undo debugging physical chassis chassis-number slot slot-number { mbus | lipc | mbuf-relay } { all |
error | event | input | output }
Default
IPC-related debugging is disabled.
Views
Probe view
Predefined user roles
network-admin
network-operator
Parameters
chassis chassis-num: Specifies a chassis by its number, which is always 0.
slot slot-num: Specifies a slot by its number.
mbus: Specifies the management bus protocol.
lipc: Specifies Leopard IPC.
mbuf-relay: Specifies MBUF relay.
all: Specifies all types of debugging.
error: Specifies error debugging.
event: Specifies event debugging.
input: Specifies input debugging.
output: Specifies output debugging.
Usage guidelines
This command supports enabling debugging for a specified module, facilitating debugging in
development.

reset hardware internal dump slot inner-port counter

Use reset hardware internal dump slot inner-port counter to clear statistics for all internal interfaces in a
slot.
14