Settings
VoIP
Configuring the Outbound Proxy
Configuring the Outbound Proxy
The outbound proxy is an intermediate server that processes all VoIP requests and connec-
tions going to the provider (except for registration).
Configuration can be carried out as follows:
• Separately for VoIP providers
• Via the configuration manager
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in
the Upgrade Center)
– Configuration manager, opened with sufficient authorisation
– A configured DNS server and, if necessary, an HTTP proxy server
1. Open the page CONFIGURATION > Voice over IP (VoIP) > VoIP provider.
2. Click
in the line of the corresponding VoIP provider.
It opens the page Provider configuration > Provider.
3. Under Outbound proxy, select one of the following options:
deactivated: Disables the outbound proxy. (No other action is required.)
automatically: Automatically determines an outbound proxy. (No other action
is required.)
manual: Enables the entry of an outbound proxy.
4. Enter the outbound proxy in the IP address or URL entry field under Outbound
proxy. The following entries are possible:
IP address with a range of 0 to 255 (example: 123.123.123.123)
URL (example: www.outboundproxy.de)
5. Enter the associated port number (Port) in the Port entry field under Outbound
proxy. The following entries are possible:
1
to
65535
Note: The port 5060 is configured in the factory settings.
Further steps:
– Save your settings before you leave the page.
422
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020