Command Manual – RRPP
H3C S7500E Series Ethernet Switches
[Sysname-rrpp-domain1] ring 10 enable
1.1.8 rrpp domain
Syntax
rrpp domain domain-id
undo rrpp domain domain-id
View
System view
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
Description
Use the rrpp domain command to create an RRPP domain and enter its view.
Use the undo rrpp domain command to remove an RRPP domain.
Note that:
When you delete an RRPP domain, the control VLAN of it will be deleted at the
same time.
When you delete an RRPP domain, you must ensure it has no RRPP ring.
The data VLAN in one domain must be isolated from the data VLAN in another.
Related commands: control-vlan, ring, ring enable, rrpp enable, timer.
Examples
# Create RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
Info: Create a new domain.
[Sysname-rrpp-domain1]
1.1.9 rrpp enable
Syntax
rrpp enable
undo rrpp enable
View
System view
Chapter 1 RRPP Configuration Commands
1-13