Undebug Rip - Allied Telesis x310-26FT Command Reference Manual

RIP C
OMMANDS

UNDEBUG RIP

undebug rip
Overview Use this command to disable the options set for debugging information of RIP
events, packets and communication between RIP and NSM.
This command has the same effect as the no debug rip command.
Syntax undebug rip {all|events|nsm|<packet>}
Mode Privileged Exec
Example To disable the options set for debugging RIP information events, use the following
command:
awplus#
Related debug rip
Commands
C613-50103-01 REV A
Parameter Description
all
Disables all RIP debugging.
events
Disables the logging of RIP events.
nsm
Disables the logging of RIP and NSM communication.
<packet> packet [recv|send] [detail]
Disables the debugging of RIP packets.
recv
Disables the logging of received packet information.
send
Disables the logging of sent packet information.
detail
Disables the logging of sent or received RIP packets.
undebug rip packet
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
832