ADTRAN AOS Version R10.1.0 Command Reference Manual page 2378

Command Reference Guide HDLC Interface Command Set
lldp receive
Use the lldp receive command to allow Link Layer Discovery Protocol (LLDP) packets to be received on
this interface. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example configures the high level data link control (HDLC) interface to receive LLDP
packets:
(config)#interface hdlc 1
(config-hdlc 1)#lldp receive
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2378