ADTRAN AOS Version R10.1.0 Command Reference Manual page 2403

Command Reference Guide
ip flow
Use the ip flow command to enable integrated traffic monitoring (ITM) for all traffic received or
forwarded on an interface. Use the no form of this command to disable traffic monitoring. Variations of
this command include:
ip flow egress
ip flow egress <name>
ip flow ingress
ip flow ingress <name>
Syntax Description
egress
ingress
<name>
Default Values
By default, no traffic monitoring is enabled.
Command History
Release 16.1
Usage Examples
The following example enables traffic monitoring on a loopback interface to monitor incoming traffic
through an ACL called myacl:
(config)#interface loopback 1
(config-loop 1)#ip flow ingress myacl
60000CRG0-35E
Specifies that all outgoing traffic be monitored.
Specifies that all incoming traffic be monitored.
Optional. Specifies the name of an access control list (ACL) to use for
filtering traffic.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Loopback Interface Command Set
2403