Table of Contents
Advertisement
default-fields route
Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
[ no ] default-fields route fieldOptions
Command introduced before JunosE Release 7.1.0.
Specifies the fields that will appear by default in the output of any subsequently issued
show ip bgp or show bgp ipv6 command that displays routes (except for the show ip
bgp summary or show bgp ipv6 summary commands). The no version removes the fields
from the output.
fieldOptions—Field(s) to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities |
extended-communities | imported | intro | in-label | loc-pref | med | next-hop |
next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale |
unknown-types | weight ]*
all—All available information; not recommended, because this information for each
network does not fit on a single line and is difficult to read
afi—Address family identifier
aggregator—AS number and IP address of aggregator
as-path—AS path through which this route bas been advertised
atomic-aggregate—Whether the atomic aggregate attribute is present
best—Whether this is the best route for the prefix
clusters—List of cluster IDs through which the route has been advertised
communities—Community number associated with the route
extended-communities—Extended community
imported—Whether the route was imported
intro—Introductory information about the state of various BGP attributes; this
information is displayed only if you specify this keyword
in-label—MPLS label for the route; the label received with incoming MPLS frames
loc-pref—Local preference for the route
med—Multiexit discriminator for the route
next-hop—IP address of the next router that is used when forwarding a packet to
the destination network
next-hop-cost—Whether the indirect next hop of the route is unreachable, if not,
displays IGP cost to the indirect next hop
Chapter 5: D Commands
495
Advertisement
Table of Contents
