Default-Fields Peer - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

default-fields peer

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
[ no ] default-fields peer fieldOptions
Command introduced before JunosE Release 7.1.0.
Specifies the fields that will appear by default in the output of subsequently issued show
ip bgp summary and show bgp ipv6 summary commands. The no version removes the
fields from the output.
fieldOptions—Field(s) to be displayed, in the format
all | [ dynamic | intro | last-reset-reason | messages-received | messages-sent |
more-in-queue | peer-type | prefixes-received | remote-as | rib-version |
send-queue-length| state | times-up | up-down-time | updates-received | updates-sent
]*
all—All available information; not recommended, because this information for each
network does not fit on a single line and is difficult to read
dynamic—Nature of peer, dynamic or not
intro—Introductory information about the state of various BGP attributes; this
information is displayed only if you specify this keyword
last-reset-reason —Reason for most recent reset
messages-received—Total number of messages received from the peer
messages-sent—Total number of messages sent to the peer
more-in-queue—Status indicating whether any messages are waiting to be sent to
this peer
peer-type—Type of BGP peer: internal, external, or confederation
prefixes-received—Number of unique prefixes received from the peer
remote-as—Remote AS number of the peer
rib-version—Last RIB version queued to be sent to this peer
send-queue-length—Number of messages queued to be sent to this peer
state—State of the BGP session
times-up—Number of times the session has been established
up-down-time—How long the session has been up or down
updates-received—Number of update messages received from the peer
Chapter 5: D Commands
493