L2C Oam - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2c oam

Syntax
Release Information
Description
Options
Mode
1150
l2c oam { neighbor neighborName end-user-id endUserId | interface interfaceType
interfaceSpecifier } [ count countValue ] [ timeout timeoutValue ]
Command introduced in JunosE Release 7.2.0.
Triggers the access node to run a local loopback test on the specified interface. There is
no no version.
neighborName—Name of the neighbor
endUserId—Output ANCP label
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
countValue—Number of local loopback messages
timeoutValue—Time (in seconds) for the access node to wait for a loopback response
from the neighbor
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.