Display Local-User - H3C S5120-SI Series Command Reference Manual

Default Domain Name
Total 2 domain(s).

display local-user

Syntax
display local-user [ idle-cut { disable | enable } | service-type { ftp | lan-access | ssh | telnet |
terminal } | state { active | block } | user-name user-name | vlan vlan-id ]
View
Any view
Default Level
1: Monitor level
Parameters
idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled.
service-type: Specifies the local users of a type.
ftp refers to users using FTP.
lan-access refers to users accessing the network through an Ethernet, such as 802.1X users.
ssh refers to users using SSH.
telnet refers to users using Telnet.
terminal refers to users logging in through the console port, AUX port, or Asyn port. Supported port
types vary by the device model.
state { active | block }: Specifies all local users in the state of active or block. A local user in the state of
active can access network services, while a local user in the state of blocked cannot.
user-name user-name: Specifies all local users using the specified username. The username is a
case-sensitive string of 1 to 55 characters and does not contain the domain name.
vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to 4094.
Description
Use the display local-user command to display information about specified or all local users.
Related commands: local-user.
Examples
# Display information about all local users.
<Sysname> display local-user
The contents of local user abc:
State:
ServiceType:
Access-limit:
Max AccessNum:
User-group:
Field
Active
ftp
Enable
300
system
1-19
Description
Default ISP domain name
2 ISP domains in total
Current AccessNum: 0