Timing Of Counter Clear At Compare-Match; Tcnt External Reset Timing; Figure 13.8 Timing Of Counter Clear By Compare-Match; Figure 13.9 Timing Of Counter Clear By External Reset Input - Renesas H8S/2158 User Manual

13.5.4

Timing of Counter Clear at Compare-Match

TCNT is cleared when compare-match A or compare-match B occurs, depending on the setting of
the CCLR1 and CCLR0 bits in TCR. Figure 13.8 shows the timing of clearing the counter by a
compare-match.
φ
Compare-match
signal
TCNT

Figure 13.8 Timing of Counter Clear by Compare-Match

13.5.5

TCNT External Reset Timing

TCNT is cleared at the rising edge of an external reset input, depending on the settings of the
CCLR1 and CCLR0 bits in TCR. The width of the clearing pulse must be at least 1.5 states. Figure
13.9 shows the timing of clearing the counter by an external reset input.
φ
External reset
input pin
Clear signal
TCNT

Figure 13.9 Timing of Counter Clear by External Reset Input

N
N – 1
Rev. 3.00 Jan 25, 2006 page 333 of 872
Section 13 8-Bit Timer (TMR)
H'00
N H'00
REJ09B0286-0300