Timer Control Register (Tcr) - Renesas H8S/2158 User Manual

Section 12 16-Bit Free-Running Timer (FRT)
12.3.8

Timer Control Register (TCR)

TCR selects the rising or falling edge of the input capture signals, enables the input capture buffer
mode, and selects the FRC clock source.
Bit Bit Name Initial Value
7 IEDGA 0
6 IEDGB 0
5 IEDGC 0
4 IEDGD 0
3 BUFEA 0
2 BUFEB 0
Rev. 3.00 Jan 25, 2006 page 296 of 872
REJ09B0286-0300
R/W Description
R/W Input Edge Select A
Selects the rising or falling edge of the input capture A
signal (FTIA).
0: Capture on the falling edge of FTIA
1: Capture on the rising edge of FTIA
R/W Input Edge Select B
Selects the rising or falling edge of the input capture B
signal (FTIB).
0: Capture on the falling edge of FTIB
1: Capture on the rising edge of FTIB
R/W Input Edge Select C
Selects the rising or falling edge of the input capture C
signal (FTIC).
0: Capture on the falling edge of FTIC
1: Capture on the rising edge of FTIC
R/W Input Edge Select D
Selects the rising or falling edge of the input capture D
signal (FTID).
0: Capture on the falling edge of FTID
1: Capture on the rising edge of FTID
R/W Buffer Enable A
Selects whether ICRC is to be used as a buffer register
for ICRA.
0: ICRC is not used as a buffer register for ICRA
1: ICRC is used as a buffer register for ICRA
R/W Buffer Enable B
Selects whether ICRD is to be used as a buffer register
for ICRB.
0: ICRD is not used as a buffer register for ICRB
1: ICRD is used as a buffer register for ICRB