L2Tp Disconnect-Cause - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

l2tp disconnect-cause

Syntax
Release Information
Description
Mode
1166
[ no ] l2tp disconnect-cause
Command introduced before JunosE Release 7.1.0.
Enables an E Series LNS to generate, for all L2TP sessions, a PPP Disconnect Cause Code
attribute value pair (AVP) and include it in all L2TP Call-Disconnect-Notify (CDN)
messages that it sends to an LAC. This action provides a mechanism for the LAC to obtain
information about the cause of a session disconnection. The no version disables
generation of the PPP Disconnect Cause Code AVP, which is the default setting.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.