Data-Flow-Format (Radius Scheme View) - H3C S5120-SI Series Command Reference Manual

Parameters
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255.
Description
Use the accounting-on enable send command to set the maximum number of accounting-on packet
transmission attempts.
Use the undo accounting-on enable send command to restore the default.
By default, the maximum number of accounting-on packet transmission attempts is 5.
Note that:
Execution of this command does not affect the results of other accounting-on related commands
such as accounting-on enable. That is, execution of the undo accounting-on enable interval
command will not disable the accounting-on feature.
The maximum number of accounting-on packet transmission attempts configured with this
command takes effect immediately.
Related commands: radius scheme, accounting-on enable.
Examples
# In RADIUS scheme rd, set the maximum number of accounting-on packet transmission attempts to
10.
<Sysname> system-view
[Sysname] radius scheme rd
[Sysname-radius-rd] accounting-on enable send 10

data-flow-format (RADIUS scheme view)

Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
View
RADIUS scheme view
Default Level
2: System level
Parameters
data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or gigabyte.
packet: Specifies the unit for data packets, which can be one-packet, kilo-packet, mega-packet, or
giga-packet.
Description
Use the data-flow-format command to specify the unit for data flows or packets to be sent to a RADIUS
server.
2-3