Data-Flow-Format; Display Local-Server Statistics - H3C s3600 series Command Manual

data-flow-format

Syntax
data-flow-format data { byte | giga-byte | kilo-byte | mega-byte } packet { giga-packet | kilo-packet
| mega-packet | one-packet }
undo data-flow-format
View
RADIUS scheme view
Parameters
data: Sets the data unit of outgoing RADIUS flows, which can be byte, giga-byte, kilo-byte, or
mega-byte.
packet: Sets the packet unit of outgoing RADIUS flows, which can be one-packet, giga-packet,
kilo-packet, or mega-packet.
Description
Use the data-flow-format command to set the units of RADIUS data flows to RADIUS servers.
Use the undo data-flow-format command to restore the default units.
By default, the data unit and packet unit of outgoing RADIUS flows are byte and one-packet
respectively.
Note that the specified unit of data flows sent to the RADIUS server must be consistent with the traffic
statistics unit of the RADIUS server. Otherwise, accounting cannot be performed correctly.
Related commands: display radius scheme.
Examples
# Specify to measure data and packets in data flows to RADIUS servers in kilo-bytes and kilo-packets
respectively in RADIUS scheme radius1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet

display local-server statistics

Syntax
display local-server statistics
View
Any view
Parameters
None
1-30