Display Local-User - H3C MSR Series Command Reference Manual

Parameters
user-name user-name: Specifies a local guest by the user name, a case-sensitive string of 1 to 55
characters. The name cannot contain a domain name. If you do not specify a guest, this command
displays pending registration requests for all local guests.
Usage guidelines
On the Web registration page, users submit local guest registration requests for approval. The guest
manager can add supplementary information to the guest accounts and approves the requests. The
device then creates local guest accounts based on the approved requests.
Examples
# Display all pending registration requests for local guests.
<Sysname> display local-guest waiting-approval
Total 1 guest informations matched.
Guest user Smith:
Full name
Company
Email
Phone
Description: The employee of YYY company
Table 2 Command output
Field
Total 1 guest informations matched.
Full name
Company
Email
Phone
Description
Related commands
reset local-guest waiting-approval

display local-user

Use display local-user to display the local user configuration and online user statistics.
Syntax
display local-user [ class { manage | network [ guest ] } | idle-cut { disable | enable } |
service-type { advpn | ftp | http | https | ike | ipoe | lan-access | pad | portal | ppp | ssh | sslvpn
| telnet | terminal } | state { active | block } | user-name user-name class { manage | network
[ guest ] } | vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
: Smith Li
: YYY
: Smith@yyy.com
: 139189301033
Description
Number of local guests that have pending registration
requests.
Full name of the local guest.
Company name of the local guest.
Email address of the local guest.
Phone number of the local guest.
Description of the local guest.
60