Display Domain - H3C S3100 Series Command Manual

Table 1-1 Description of the Port NO field
31 to 28 bit
UNIT ID

display domain

Syntax
display domain [ isp-name ]
View
Any view
Parameters
isp-name: Name of an ISP domain, a string of up to 128 characters. This must be the name of an
existing ISP domain.
Description
Use the display domain command to display configuration information about one specific or all ISP
domains.
Related commands: access-limit, domain, scheme, state.
Examples
# Display configuration information about all ISP domains.
<Sysname> display domain
0 Domain = system
State = Active
Scheme = LOCAL
Access-limit = 512
Vlan-assignment-mode = Integer
Domain User Template:
Idle-cut = = Enable Time = 60(min) Flow = 200(byte)
Self-service URL = http://aabbcc.net
Messenger Time Maxlimit = 30(min) span = 10(min)
Default Domain Name: system
Total 1 domain(s).1 listed.
Table 1-2 Description on the fields of the display domain command
Field
Domain
State
Scheme
Access-Limit
27 to 24 bit
Slot number Sub-slot number
Domain name
Status of the domain, which can be active or block.
AAA scheme that the domain uses
Maximum number of local user connections in the domain
23 to 20 bit 19 to 12 bit
Port number
Description
1-15
11 to 0 bit
VLAN ID