Display Domain - H3C MSR Series Command Reference Manual

Examples
# In ISP domain test, set the DHCPv6 request timeout timer to 90 seconds for PPPoE and L2TP
users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] dhcpv6-follow-ipv6cp timeout 90
Related commands
basic-service-ip-type

display domain

Use display domain to display ISP domain configuration.
Syntax
display domain [ isp-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
isp-name: Specifies an ISP domain by its name, a case-insensitive string of 1 to 255 characters. If
you do not specify an ISP domain, this command displays the configuration of all ISP domains.
Examples
# Display the configuration of all ISP domains.
<Sysname> display domain
Total 2 domains
Domain: system
State: Active
Default authentication scheme:
Default authorization
Default accounting
Accounting start failure action: Online
Accounting update failure action: Online
Accounting quota out action: Offline
Service type: HSI
Session time: Exclude idle time
DHCPv6-follow-IPv6CP timeout: 60 seconds
Authorization attributes :
Idle cut: Disabled
IGMP access number: 4
MLD access number:
Domain: dm
State: Active
Local
scheme: Local
scheme: Local
4
43