Parallel Line - Leica 3D Disto User Manual

6.5.6
Description
Parallel Line step-
by-step
1.800.561.8187 3D Disto, Software Applications

Parallel Line

Parallel line allows laying out lines parallel to a reference line on walls, floors, or tilted
surfaces.
Step Description
1. Start application in Menu » Applications » Tool Kit.
The running application stays open in the background.
2.
Press on the toolbar.
Pointfinder opens.

All points have to be measured on the same surface.
3. Target and measure start and end point of the reference line.
4. A pop-up prompts to enter parallel distance to the left or right of the refer-
ence line. Press OK to confirm the entered value.
Pointfinder opens to roughly target layout point.
5.
Press .
Laser point flashes to indicate the exact position on the parallel.
6.
Press to close Tool Kit.
www.
information@itm.com
.com
61