Staking To A Reference Line/Arc; Staking The Points - Leica TPS1200 series Technical Reference Manual

Reference Line
42.6
42.6.1
Description
Access
Stake to line - horizontal
measurements

Staking to a Reference Line/Arc

Staking the Points

Allows for the position of a point to be defined relative to a reference line/arc and then staked.
Select <Task: Stake to XX> in REFLINE Choose Task & Reference Line, Reference
page and press CONT (F1) to access REFLINE Enter Offset Values. Refer to "42.4.3
Defining the Offsets related to a Reference Line/Arc" to access REFLINE Choose Task
& Reference Line.
OR
Press STAKE (F5) in REFLINE Measure Points. Refer to "42.5 Measuring to a Refer-
ence Line/Arc" to access REFLINE Measure Points.
d2
P0
P1
TPS12_184
TPS1200
P2
P4
P0 Instrument station
d1
P1 Start point
P3
P2 End point
P3 Target point
P4 Reference point
d1
d2
<Stake Offset:>
<Along Line:>
998