Renault Laguna III Manual page 2107

FRONT AXLE COMPONENTS
Front brake calliper: Removal - Refitting
- the calliper with the inner brake pad on the calliper
mounting,
- the guide pin bolts.
a Tighten to torque:
- the guide pin bolts (28 N.m),
- the brake pipe union (14 N.m).
a Refit:
- the plugs at the end of the guide pins,
- the retaining spring using a large flat-blade screw-
driver.
a Set the wheels straight ahead.
a Secure the brake hose to the shock absorber.
III - FINAL OPERATION
a Remove the pedal press.
a Bleed the brake circuit (see 30A, General informa-
tion, Braking circuit: Bleed, page 30A-4) .
a Refit the front wheel (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
Note:
it is necessary to unlock the airbag computer in
order to lock the steering column.
a Apply the after repair procedure using the Diagnos-
tic tool :
- connect the Diagnostic tool,
- select the airbag computer,
- go to repair mode,
- apply the "After repair procedure".
31A-9
31A