Selecting The Language - Auerswald COMpact 3000 analog Operating Manual

Basic Knowledge Configuration Manager
Configuration Manager

Selecting the Language

The table is sorted in descending order. The table was sorted according to the
entries of the column in question.
Clicking the symbol sorts the table in ascending order.
Clicking the symbol next to a column heading sorts the table in ascending
order according to the entries of the column in question.
Clicking the symbol shows the begin of the current data.
Clicking the symbol switches you to the preceding page.
Clicking the symbol switches you to the following page.
Clicking the symbol shows the end of the current data.
Highlightings
The configuration manager has a standard and an expert view. The additional
topics in the expert view are highlighted via a shading.
Selecting the Language
You can select the language for the configuration manager.
The selection can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > Server configuration > Network.
Note: The selection is also provided in the international model during the
quick configuration using the configuration wizard.
2. Select the desired language in the Language list field under Webserver configu-
ration.
German
English
Further steps:
– Save your settings before you leave the page.
88
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020