Dead-Interval - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

dead-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
dead-interval seconds;
[edit logical-systems logical-system-name protocols ospf area area-id peer-interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface
interface-name],
[edit protocols ospf area area-id peer-interface interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols (ospf | ospf3) area area-id virtual-link],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id
virtual-link],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the realm statement introduced in Junos OS Release 9.2.
Support for the statement introduced in Junos OS Release 9.2 for EX Series
realm
switches.
Specify how long OSPF waits before declaring that a neighboring routing device is
unavailable. This is an interval during which the routing device receives no hello packets
from the neighbor.
—Interval to wait.
seconds
Range: 1 through 65,535 seconds
Default: 40 seconds (four times the hello interval)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
hello-interval on page 2042
Configuring OSPF Timers
Chapter 79: Configuration Statements for Layer 3 Protocols
2001