L2Tp Disable Calling-Number-Avp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
l2tp disable calling-number-avp
Syntax
Release Information
Description
Mode
1162
[ no ] l2tp disable calling-number-avp
Command introduced before JunosE Release 7.1.0.
Prevents the E Series LAC from sending the Calling Number attribute value pair (AVP)
in incoming-call-request (ICRQ) packets. The no version enables sending of the Calling
Number AVP, the default setting.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
