Snmp Trap To Webview - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

snmp trap to webview

Enables the forwarding of traps to WebView.
snmp trap to webview {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default, WebView forwarding is enabled.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
To view the current WebView forwarding status, use the show snmp trap config command.
Examples
-> snmp trap to webview enable
-> snmp trap to webview disable
Release History
Release 6.1; command was introduced.
Related Commands
show snmp trap config
MIB Objects
trapFilterTable
trapToWebView
page 61-20
Enables WebView forwarding. When WebView forwarding is enabled,
all traps sent by switch applications are also forwarded to WebView.
This allows a WebView session to retrieve the trap history log.
Disables WebView forwarding.
Displays the SNMP trap information, including the current status for
trap absorption and WebView forwarding.
OmniSwitch CLI Reference Guide
SNMP Commands
June 2012