Show Dns - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show dns

Displays the current DNS resolver configuration and status.
show dns
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
The following is an example of the output display on OmniSwitch stackable and chassis-based switches:
-> show dns
Resolver is
domainName
IPv4 nameServer(s): 189.202.191.14
IPv6 nameServer(s): fe2d::2c
output definitions
Resolver is
domainName
IPv4 nameServer(s)
IPv6 nameServer(s)
Release History
Release 6.1; command was introduced.
Release 6.3.1; IPv4 nameServer(s) and IPv6 nameServer(s) fields are added.
page 62-8
: enabled
: company.com
: 189.202.191.15
: 188.255.19.1
: f302::3de1:1
: f1bc::202:fd40:f3
Indicates whether the DNS resolver is enabled or disabled.
Indicates the default domain name assigned to the DNS lookups. This
value is set using the
Indicates the IP address(es) of the IPv4 DNS server(s). These addresses
are set using the
Indicates the IPv6 address(es) of the IPv6 DNS server(s). These
addresses are set using the
ip domain-name command.
ip name-server command.
ipv6 name-server
OmniSwitch CLI Reference Guide
DNS Commands
command.
June 2012