Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 3641

SNMP Commands
show snmp object
Displays the associated SNMP object name or object ID.
show snmp object {identifier name | name oid}
Syntax Definitions
name
oid
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Use this command to find the related name or object ID of an SNMP object.
•
When using the identifier parameter the name is case sensitive.
Examples
-> show snmp object identifier systemMicrocodeIndex
1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1.1.1
->show snmp object name 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1.1.1
systemMicrocodeIndex
output definitions
OID
Name
Release History
Release 6.1; command was introduced.
Related Commands
show snmp mib family
OmniSwitch CLI Reference Guide
The name of the object for which the OID should be displayed.
The object ID of the object for which the name should be displayed.
The OID of the associated name.
The name of the associated OID.
Displays SNMP MIB information. Information includes MIP ID num-
ber, MIB table name, and command family.
June 2012 page 61-33