Reset Radius Statistics; Reset Stop-Accounting-Buffer - H3C s3100 series Command Manual

reset radius statistics

Syntax
reset radius statistics
View
User view
Parameters
None
Description
Use the reset radius statistics command to clear RADIUS message statistics.
Related commands: display radius scheme.
Examples
# Clear RADIUS message statistics.
<Sysname> reset radius statistics

reset stop-accounting-buffer

Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name }
View
User view
Parameters
radius-scheme radius-scheme-name: Deletes the buffered stop-accounting requests of a specified
RADIUS scheme. Here, radius-scheme-name is the name of a RADIUS scheme, which is a string of up
to 32 characters that does not contain any of the following characters: /:*?<>.
session-id session-id: Deletes the buffered stop-accounting requests of a specified session. Here,
session-id is a session ID, which is a string of up to 50 characters.
time-range start-time stop-time: Deletes the buffered stop-accounting requests generated within a
specified time period. Here, start-time is the start time of the time period, stop-time is the end time of the
time period, and both are in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Deletes the buffered stop-accounting requests of a specified user. Here,
user-name is the name of a user, which is a string of up to 184 characters.
Description
Use the reset stop-accounting-buffer command to delete stop-accounting requests that are buffered
on the switch due to getting no response.
Related commands:
stop-accounting-buffer.
stop-accounting-buffer
1-53
enable, retry stop-accounting, display